Surebond SB-190 Everseal Adhesive Sealant in clear is a recommended accessory for all metal roof system applications. When applied to the snow guard’s base and entire perimeter (4 sides), it creates a bond and watertight seal with the metal roof system, ensuring proper installation.
Not recommended for use with soft expansion joints, polystyrene or styrene containing plastic.
APPLICATION:
Interface and surfaces must be clean, dry and free of dust, dirt, oil and water-proofing and release agents.
Cut cartridge nozzle at slant to 1/4” hole and puncture inner seal, apply bead size as desired. Apply uniform
bead with steady pressure. Tool immediately after application to ensure full contact with both sides of the
joint area. Sealant starts to skin over in 20-25 minutes. Minimum application temperature of 50°F.
Additional information:
Material Safety Data Sheet Click here (.pdf opens in new tab)
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Shipping Services- This product can only be shipped via Ground services. UPS Next Day Air and UPS 2nd Day Air are not available for this product. If either of these options are selected at checkout your product will be shipped via UPS Ground and the difference in cost will be refunded to your payment method. This product is also not available for shipment internationally, to Alaska, or to Hawaii.
