The Hardy Rib Panel is very affordable as a siding option for your barn or garage. We stock (in coil form) 23 colors for the Hardy Rib Panel, making production times as short as 24 hours to never more than a few days. We have color matched trims for all colors available. The Hardy Rib Panel has a deep channel anti-siphon rib to prevent capillary action, along with five 3/4″ major ribs and eight minor ribs to decrease oil canning.
*View the color chart matrix below for the colors available in this profile.
All Hardy Rib panels come with an exclusive 40-year Paint Warranty and Lifetime Steel Warranty. Sample warranty available on our warranties page.
The Hardy Rib Premium Panel has eight layers of coatings to complete the paint system. It also features an exclusive limited lifetime paint & steel warranty. With the best warranty and paint coatings available in the industry, you will know your home will be protected from the elements for hundreds of years.
- 16 standard colors in stock (in coil form)
- 4 Textured Paint colors in stock. (See below for more info.)
- 4 Woodgrain 28 gauge colors in-stock (lead time may vary)
- 2 Stackstone 26 gauge colors in-stock (lead time may vary)
- 29 gauge (.015″ minimum thickness before paint)
- Made Standard in #1 Prime AZ50 Galvalume® Steel.
- G-100 Galvanized Steel is available for buildings used for animal confinement. (12 colors options, special order)
- Structural strength ASTM-A792, grade 80 steel.
- Weighs on average 68 lbs per 100 sq. ft.
- Iron Clad 40-year Paint and Lifetime Steel Warranty.
- 36″ wide nominal coverage.
- Made in sizes 3ft to 50ft, cut to the whole inch.
- Exposed Fastener Panel System.
- Order production time: 1-2 business days for standard colors*
- Quote and buy online. Click here.
Looking for a WoodGrain or Stone Look? We have you covered!
Woodgrain steel siding panels combine the natural aesthetic of wood with the durability and low maintenance of steel. These panels are designed to replicate the warmth and texture of real woodgrain while providing enhanced performance and longevity. Available in various profiles and colors, they are ideal for residential, commercial, and agricultural applications.
Additional Product Information
Use this table to determine appropriate fastener distance based on your live load and wind load requirements.
Industry standard for the State of Michigan is 24 inch span.
Allowable Usable Load Table
Span (Inches) | 18″ | 24″ | 30″ | 36″ | 48″ | 54″ |
|---|---|---|---|---|---|---|
29 Gauge Live Load (PSF) | 199 | 112 | 71 | 49 | 28 | 22 |
29 Gauge Wind Load (PSF) | 211 | 118 | 76 | 52 | 49 | 23 |
Notice:
1. Theoretical allowable loads are based on section properties and allowables calculated in accordance with 2001 AISI Specifications.
2. Theoretical allowable loads are based on three or more uniform spans.
3. For roof panels, deduct self weight for actual ‘live load’ capacity of the panel.
4. These loads are for panel strength. Frames, purlins, decks and fasteners must be designed to resist all loads imposed on the panel.
Installation Guide, Standard Trims Book, and Color Chart Downloads
Downloadable Installation Guide (PDF)
Downloadable Standard Trim Pieces (PDF)
View the Color Chart & Color Matrix (PDF)
