Skip to content

Hardy Loc Standing Seam Metal Roofing Panels

Hardy Loc Standing Seam Metal Roofing Panels
  • Industrial and Commercial Applications
  • Can be made in lengths 3′-50′(sizes over 25′ can only be made in 24 or 22 gauge steel & have an additional crating charge)
  • 16″ width panel (Standard width)- 26 and 24 gauge steel
  • Eight 26 gauge Colors in stock.
  • Available in a total of 60 colors. (See color charts/matrix below)
  • UL 790 Fire Resistance Class A
  • UL 2218A Impact Resistance Class 4
  • 24 or 22 gauge premium steel w/Kynar® paint and 26 gauge premium steel w/Textured Paint available. (500 lin. ft min. order)
  • 20″ width panel- 24 & 22 gauge steel and 0.040″ Aluminum. (500 lin. ft min. order)
  • 12″ width panel- 26, 24, & 22 gauge steel and 0.040″ Aluminum. (750 lin. ft min. order)
  • Made standard with Ruler ribs to decrease oil canning and telegraphing
  • Mechanically Seamed System (Must use a manual or mechanical seaming tool to secure panels together.)
  • Mechanical seamers can be rented from Quality Roof Seamer. Click here to learn more
  • Used on roofs with pitches of 0:12 or above
  • Current Lead time approximately 2-4 weeks*

The Hardy Clip standing seam metal roofing panel is available in an array of colors, created to make any home the envy of the community. Our standing seam panels can be site-formed, rather than pre-formed. Many or even the majority of standing seam panels available today are pre-formed, which means they’re produced in a factory and then are delivered to the supplier before making their final stop at your home. We are the manufacturer, so your individual panels are made to order in house and cut to the inch, making sure that your panels will be the right size, fit, and color match. Hardy Rib panels, Hardy Snap panels, and Hardy Loc panels likewise run in house and cut to the inch so that you can be certain that what you order is just what you get.

Not all Steel Roofing is Created Equal. Make an Educated decision.

For Commercial and Industrial Use

Our Hardy Loc standing Seam Panel is a mechanically seamed panel. Unlike the Hardy Snap and Hardy Clip standing seam panels our 1-1/2″ mechanical lock standing seam panel is attached with clips and seamed with a power or manual seaming tool that makes a single fold or a double fold. This makes the Hardy Loc panel system able to be installed on roofs with extremely low pitches, 1/2:12 with a single seaming machine or 0:12 with a double seaming machine. Please be aware this panel is not made to be a “beauty” panel it is designed to perform on low or flat roofs and will give an industrial look to houses or commercial buildings.

The Hardy Loc Standing Seam Panel has eight layers of coatings to complete the paint system. It also features an exclusive limited lifetime paint & steel warranty. With the best warranty and paint coatings available in the industry, you will know your home will be protected from the elements for hundreds of years.

All of our Standing Seam Panels come with an exclusive Limited Lifetime Non-Prorated Paint & Steel Warranty. Sample warranty available upon request.

See how a mechanical seamer tool works.

The mechanical seamers can be rented from Quality Roof Seamer. Click here to learn more.

Take a quick one-question survey and receive a Free Malco 1/4" Hex Driver with any purchase online or in-store.* 

    Your Cart
    Your cart is emptyReturn to Shop